I was asked a few times why do I share my squares right after I am finished, without blocking, which makes the squares appear uneven or not as perfect as it looks in the link to the pattern. There is a method to my madness! In my years of crocheting, I have found that most books, magazines, websites and blogs that feature crochet show completed pieces at their most perfect. While I understand the intent behind it, I would have loved to have seen some of those pieces before the blocking and perfecting done to it, so when my piece was done I wouldn't look at theirs and back at mine and think I did something wrong. I like to show what yours may look like RIGHT when you complete the piece. If it is a wee bit wonky or crooked, that is ok, because that is how it is straight off the hook.
As for blocking-I mentioned this quite a few times and a few people have mentioned to me they have no idea what I am talking about. :) So this is for you! Blocking is when you wet the finished piece and arrange it in a way that when it dries it comes out with straight edges, neat, clean lines and perfect gauge. The process I use is one I learned a hundred years ago when I made my first scarf:
You will need: 2 towels-must be colorfast, light colors or white are best, a bunch of rust proof safety pins and access to cold water.
- Wet your piece in the sink or tub until it is thoroughly wet. I use cold water for everything, no matter if it is acrylic, wool, cotton, a blend, etc. Only because this ensures no shrinking or felting ruin all my hard work.
- Lay out your 2 towels.
- Lay your piece(s) down on one of the towels and roll it up. If you are doing a bunch of smaller pieces, you can put a few down on the towel at once.
- Press firmly all along the towel roll to get out any extra wetness.
- Unroll the towel and move the piece(s) to the second towel. Begin to arrange your piece(s) and safety pin them into the shape you want.
- Leave to dry. Usually it is about a day. But make sure they are dry before you remove them.
There are different variations on this-some people put plastic down before they pin the pieces, some people just spray with a mister instead of wetting the pieces in a sink and there is also a way to block using a steam iron(although it is not recommended for synthetics).
Any other questions I will be more than happy to answer, either privately or here on the blog!